| 83 Enhanced Sequential Mode | ||||
✻ |
|
|
|
| |
|
|
|
| Serial number | This prompt can be used to enroll the transmitter serial number via |
| Ib | zz |
| Enter transmitter’s 7- digit serial number via RF | RF transmission or manually. If using the RF Learning Mode there |
|
| is no need to manually enter a serial number. Proceed directly to RF | |||
|
| learning or manually. | Learning. Upon entering the Serial Number mode, the Zone | ||
|
|
| |||
|
|
|
| [#] = return to (1A) prompt and reject whatever | Descriptors will be announced. |
|
|
|
| serial number entries have been made. | Note: BR type devices can be enrolled only by transmission from BR |
| Ib |
|
| [✻] = return to (1A) prompt (if a valid serial | devices. Likewise, UR and RF devices can only be enrolled by |
|
|
| number has been enrolled, “L” is displayed | transmission from a UR or RF device | |
|
|
|
| ||
|
|
|
| and the serial number will be copied into | RF Learning - Two (2) transmissions (2 key depressions) at least |
|
|
| |||
|
|
|
| EEROM and the last serial entered buffer. | five seconds apart, will be required for BR type or four (4) |
|
|
|
|
| transmissions (fault, restore and fault, restore) for UR or RF type. If |
|
|
|
| Note: For zones 26, 30, 34 and 38 only BR type | the learned serial number has a different loop number than that |
|
|
|
| entered in ✻56 the system will announce the Voice Descriptor, if it | |
|
|
|
| devices can be used. | |
|
|
|
| is programmed, followed by two beeps and will return to Prompt (1A) | |
|
|
|
|
| |
|
|
|
|
| and “L” will be displayed. |
|
|
|
|
| If the loop number captured by RF transmission and that entered in |
|
|
|
|
| ✻56 mode match, the system will announce the Voice Descriptor, if it |
|
|
|
|
| is programmed, followed by three beeps and return to Prompt (1A) |
|
|
|
|
| and “LC” will be displayed. No additional transmissions are needed |
|
|
|
|
| for confirmation. |
|
|
|
|
| Manual Entry - Enter the |
|
|
|
|
| transmitter. If you enter an incorrect digit, press the [#] key to |
|
|
|
|
| backup to prompt (1A) and start over. When all 7 digits are entered, |
|
|
|
|
| press the [✻] key. If less than 7 digits are entered, the keypad will |
|
|
|
|
| emit a single long beep and return to the (1A) prompt without |
|
|
|
|
| displaying the “L”. |
|
|
|
|
| If more than 7 digits have been entered, the first 6 digits will be |
|
|
|
|
| saved along with the last digit that was entered (entering 123456789 |
|
|
|
|
| yields the serial number 1234569). |
|
|
|
|
| Note: If 52 seconds pass and no entry has been made, the system |
|
|
|
|
| returns to prompt (1A). |
|
|
|
|
|
|
|
|
|
| Delete serial number | This function deletes only the serial number. |
| F |
| |||
|
|
| 0 = discard the delete request | Entering a “9” at prompt (1A). Confirmation of the delete request will | |
|
|
| 1 = confirm requested delete | cause deletion of the serial number pertaining to the zone being | |
|
|
|
| Note: Entering a “9” at prompt (1A) will cause the | programmed. |
|
|
|
|
| |
|
|
|
| panel to return to prompt (1A) regardless of the |
|
|
|
|
| confirmation answer. |
|
|
|
|
|
|
|
Note: In Enhanced Sequential Learn Mode, 4 button type keys will always be learned simultaneously. They will be stopped at the 4 button boundaries of 26, 30, 34 and 38, provided the zone is free of a serial number. If the first zone of the key has a serial number learned, the remaining keys cannot be programmed in sequential learn mode. In addition, if the zone has not been set up (duplicate loop, missing zone type, etc.) only entries 0 (skip to the next zone) and 4 (copy the key template) will be allowed.
- 40 -
