Enhanced Zone Programming Mode, Descriptor | Honeywell K14114 3/06 Rev.B

			LYNXR-I Installation and Setup Guide
		56 Enhanced Zone Programming Mode
		✻
		Descriptor 1	† see ✻84 Assign Zone Voice Descriptors section for vocabulary index
Id		Descriptor 1
	vi	Enter [#] + 2-digit vocabulary index number† of	Use the [6] or [8] key to advance as described.
		first descriptor word for this zone.	Use the [6] or [8] key to advance as described.
		first descriptor word for this zone.	To change the entered index number before pressing [6] or [8], simply
		6 = accept word and advance to descriptor 2
		6 = accept word and advance to descriptor 2	press [#] + desired 2-digit vocabulary index number.
		(descriptor 2 will be announced)	press [#] + desired 2-digit vocabulary index number.
		(descriptor 2 will be announced)	If descriptor 1 is not desired, enter [#] + 99 (blank), then press [8] to
		8 = accept word and advance to next zone	return to zone number prompt.
		(prompt A) – entire zone descriptor will be
		announced
		Press any other key to repeat the selected word.

		Descriptor 2	† see ✻84 Assign Zone Voice Descriptors section for vocabulary index
IE		Descriptor 2
	vi	Enter [#] + 2-digit vocabulary index number† of
	vi	second descriptor word for this zone.	Use the [6] or [8] key to advance as described.
		6 = accept word and advance to descriptor 3	To change the entered index number before pressing [6] or [8], simply
		(descriptor 3 will be announced)	press [#] + desired 2-digit vocabulary index number.
		8 = accept word and advance to next zone	If descriptor 2 is not desired, enter [#] + 99 (blank), then press [8] to
		8 = accept word and advance to next zone	return to zone number prompt.
		(prompt A) – entire zone descriptor will be	return to zone number prompt.
		(prompt A) – entire zone descriptor will be
		announced
		Press any other key to repeat the selected word.

		Descriptor 3	† see ✻84 Assign Zone Voice Descriptors section for vocabulary index
		Descriptor 3
IF	vi	Enter [#] + 2-digit vocabulary index number† of	Use the [6] or [8] key to advance as described.
		third descriptor word for this zone.	Use the [6] or [8] key to advance as described.
		third descriptor word for this zone.	To change the entered index number before pressing [6] or [8], simply
		6 or 8 = accept word and advance to next zone
		6 or 8 = accept word and advance to next zone	press [#] + desired 2-digit vocabulary index number.
		(prompt A) – entire zone descriptor will	press [#] + desired 2-digit vocabulary index number.
		(prompt A) – entire zone descriptor will	If descriptor 3 is not desired, enter [#] + 99 (blank), then press [8] to
		be announced	return to zone number prompt.
		Press any other key to repeat the selected word.

- 33 -

Honeywell K14114 3/06 Rev.B Enhanced Zone Programming Mode, LYNXR-IInstallation and Setup Guide

Models: K14114 3/06 Rev.B

Descriptor 1