System Operation
Keypad Functions
The keypad allows the user to arm and disarm the system, and perform other system functions, such as bypassing zones. Zone and system conditions (alarm, trouble, bypass) are displayed in the display window. When an alarm occurs, keypad sounding and external sounding will occur, and the zone(s) in alarm will be displayed on the keypad. Pressing any key will silence the keypad sounder for 10 seconds (only once). Disarming the system will silence both keypad and external sounders. When the system is disarmed, any zones that were in an alarm condition during the armed period will be displayed (memory of alarm). To clear this display, simply repeat the disarm sequence (enter the security code and press the OFF key). The keypad also features chime annunciation, and 3 panic key pairs for silent, audible, fire or personal emergency alarms. These keys can notify the central station of an alarm condition, if that service is connected. A summary of system functions is provided below for more detailed information refer to the User’s Manual.
Security Functions (Empty boxes represent the user’s security code)
Checking system status: |
|
|
| (high | level | messages); press |
|
|
| again for secondary | ||||||||
STATUS | STATUS | |||||||||||||||||
messages |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To arm in STAY mode: |
|
|
|
|
| + |
|
|
| (or installer code + [3]) | ||||||||
|
|
|
|
|
| STAY | ||||||||||||
To restart exit delay: |
|
| (applies only if system is armed in Stay mode) | |||||||||||||||
STAY | ||||||||||||||||||
To arm in AWAY mode: |
|
|
|
|
| + |
|
|
| (or installer code + [2]) | ||||||||
|
|
|
|
|
| AWAY | ||||||||||||
To arm with NO DELAY: |
|
|
|
|
| + |
| or |
|
| + |
|
| |||||
|
|
|
|
| AWAY | STAY | NO DELAY |
| ||||||||||
To arm if Quick Arm is programmed: |
| or |
| (hold down for at least 2 seconds) | ||||||||||||||
AWAY | STAY | |||||||||||||||||
To disarm the system and silence alarms: |
|
| + |
|
|
|
|
|
| |||||||||
|
| OFF |
|
|
|
|
|
| ||||||||||
Note: During Exit Delay or when an Alarm Condition exists the system can be disarmed by entering the User Code and entering the OFF key is not required.
To bypass a zone(s): |
|
To turn Chime mode on or off: | FUNCTION |
+
+
CHIME
BYPASS
+
Message Center |
|
To record a message: | FUNCTION |
To stop recording before end of 90 seconds: OFF
........................To play back a message: | FUNCTION |
To skip a message: | [✻] |
To delete all messages: |
|
FUNCTION |
+
+
+
RECORD
PLAY
DELETE (during message replay)
Volume Control |
|
|
|
|
|
|
|
|
|
|
|
| ||
To adjust message playback/system announcement volume: |
|
|
|
| + |
| ||||||||
| FUNCTION | VOLUME | ||||||||||||
To mute system announcements: |
|
| + |
|
|
| + |
|
|
|
| |||
FUNCTION | VOLUME |
|
| OFF |
|
| ||||||||
To restore/unmute announcement & volume: |
|
| + |
| + [3] or [6] | |||||||||
| FUNCTION |
| VOLUME | |||||||||||
+ [3] or [6]
Other Functions
To set the time and date: ....................... 
To set the scheduling: ............................. 
To activate or deactivate X10 devices 
To delete a user code (except Master Code): To turn Test mode on: ............................. 
To turn Test mode off: ............................ 
| + |
|
|
|
|
|
| + [63] |
|
|
|
|
| ||||
|
| FUNCTION | |||||||||||||||
| + |
|
|
|
|
|
| + [64] |
|
|
|
|
| ||||
|
| FUNCTION | |||||||||||||||
|
| + |
|
|
|
|
|
| or |
|
|
| + device number | ||||
FUNCTION |
| LIGHTS ON | LIGHTS OFF | ||||||||||||||
|
|
|
|
| + |
|
|
|
| + |
| or |
| + dev. No. | |||
|
|
|
|
| FUNCTION | LIGHTS ON | LIGHTS OFF | ||||||||||
| *+ |
|
|
|
| + user number + user’s code (*master code) | |||||||||||
|
|
| CODE | ||||||||||||||
|
|
|
|
| *+ |
|
| + user number (* master code) | |||||||||
|
|
|
|
| CODE | ||||||||||||
+ |
|
TEST | |
+ | OFF |
- 51 -
