|
|
| |
|
|
| Data Field Descriptions |
|
|
|
|
| ✻63 | Low Battery Report Code | This will be sent when a low battery condition exists in the |
| (See notes above) | system’s standby battery. | |
|
|
| |
|
|
|
|
| ✻64 | Test Report Code | This is sent periodically to test that the communicator and |
| phone lines are operational (frequency of report is selected in | ||
|
| (See notes above) | field ✻51). |
| ✻65 | Open Report Code | This is sent upon disarming of the system. 2nd digit = user |
| (See notes above) | number, if expanded or 4+2 reporting is selected. | |
|
| ||
|
|
|
|
| ✻66 | Arm AWAY/STAY Report Code | This option allows for independent programming of AWAY and |
| (See notes above) | STAY reports. 2nd digit of report is user number if expanded or | |
|
| ||
|
|
| 4+2 reporting is selected. |
|
|
| NOTE: OPEN reports are not sent if the associated closing |
|
|
| report is not enabled. |
|
|
|
|
| ✻67 | RF transmitter Low Batt. Report Code | This is sent in the event that a wireless transmitter low battery |
| (See notes above) | condition exists. | |
|
| ||
| ✻68 | Cancel Report Code | This is sent upon disarming of the system after an alarm |
| (See notes above) | condition was reported. | |
|
| ||
| RESTORE REPORT CODES |
| |
| ✻70 | Alarm Restore Report Code, 1st Digit | Sent when the zone that caused an alarm is restored to its non- |
| (See notes above) | faulted condition. 2nd digit is automatically sent as the 2nd digit | |
|
| ||
|
|
| of the zone alarm report code programmed in field ✻56, if |
|
|
| expanded or 4+2 reporting is selected. |
| ✻71 | Trouble Restore Report Code | Sent when a trouble in a zone is restored. |
| (See notes above) |
| |
|
|
| |
|
|
|
|
| ✻72 | Bypass Restore Report Code | Sent when a zone that has been bypassed is unbypassed. |
| (See notes above) |
| |
|
|
| |
|
|
|
|
| ✻73 | AC Restore Report Code | Sent when AC power has been restored after an AC power |
| (See notes above) | outage. | |
|
|
| |
|
|
|
|
| ✻74 | Low Battery Restore Report Code | Sent when a system low battery condition is restored to normal. |
| (See notes above) |
| |
|
|
| |
|
|
|
|
| ✻75 | RF Transmitter Low Batt. Restore Code | Sent when a transmitter that previously sent in a “low battery” message |
| (See notes above) | has sent a message indicating it no longer has a low battery condition. | |
|
|
| |
|
|
|
|
| ✻76 | Test Restore Report Code | Sent when the test mode is exited. A restore code entered here will cause |
| (See notes above) | a restore message to be sent when Test mode is exited. | |
|
|
| |
|
|
|
|
- 25 -
