HP 205 G1 manual Inventory error during MEBx execution, Try a different USB key device for

Table 10-1Numeric Codes and Text Messages (continued)

Control panel message	Description	Recommended action
		3.	If the memory configuration was recently
			changed, unplug the power cord, restore
			the original memory configuration, and
			reboot the computer.
		4.	If the error persists, replace the system
			board.
2202-PMM Deallocation Error during MEBx	Memory error during POST execution of the	1.	Reboot the computer.
cleanup	Management Engine (ME) BIOS Extensions	2.	Unplug the power cord, re-seat the
	option ROM.
			memory modules, and reboot the
			computer.
		3.	If the memory configuration was recently
			changed, unplug the power cord, restore
			the original memory configuration, and
			reboot the computer.
		4.	If the error persists, replace the system
			board.
2203-Setup error during MEBx execution	MEBx selection or exit resulted in a setup	1.	Reboot the computer.
	failure.	2.	Unplug the power cord, re-seat the
			memory modules, and reboot the
			computer.
		3.	If the memory configuration was recently
			changed, unplug the power cord, restore
			the original memory configuration, and
			reboot the computer.
		4.	If the error persists, replace the system
			board.
2204-Inventory error during MEBx execution	BIOS information passed to the MEBx resulted	1.	Reboot the computer.
	in a failure.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2205-Interface error during MEBx execution	MEBx operation experienced a hardware error	1.	Reboot the computer.
	during communication with ME.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2211-Memory not configured correctly for	DIMM1 or XMM1 is not installed.	Make sure there is a memory module in the
proper MEBx execution.		black DIMM1 socket and that it is properly
		seated.
2212-USB Key Provisioning failure writing to	USB device used for USB key provisioning will	1.	Try a different USB key device for
device	not allow BIOS to update provision file		provisioning.
	properly.	2.	If the error persists, update to the latest
			BIOS version and ME firmware version.
		3.	If the error still persists, replace the
			system board.

104 Chapter 10 POST Error Messages