HP 205 G1 manual Inch hard drive

3.Loosen the captive Phillips screw (1) that secures the hard drive cage to the computer, and then slide the cage toward the edge of the chassis to disengage it from the connector, and lift it out of the computer (2).

NOTE: Hard drive cage appearance may vary.

4.Both 3.5-inch and 2.5-inch hard drives are supported. A 2.5-inch hard drive requires an adapter to fit into the hard drive cage. To remove the hard drive, refer to the procedures below that correspond to the size of your drive:

3.5-inch hard drive:

▲Remove the four Phillips screws (1) that secure the drive to the cage, and then slide the drive out of the cage (2).

Replacing drives 23