Converter board
Description | Spare part number |
|
|
Converter board | |
|
|
The converter board is located on the left side of the computer (viewed from behind) under the main rear cover. It is secured with two Torx screws and has two connectors.
Use the same converter spare part for all display panels; however, you must change jumper settings on the board based on the display panel.
To remove the converter board:
1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 18).
2.Remove the rear cover (see Rear cover on page 19).
3.Disconnect the two cables from the board (1).
NOTE: Be careful not to damage the cables when disconnecting them from the board. Do not pull on the wires.
4.Remove the black Torx screw (2) that secures the board to the computer.
Converter board 29