HP 6000 Router manual Entering serial port sub-menu

40CHAPTER 4: SOFTWARE MAINTENANCE

Booting from Flash

Entering serial port sub-menu

Enter <2> in Boot main menu and the system will enter serial port sub-menu. The following information is shown on the terminal screen:

Boot From Serial Port

======================<SERIAL SUB-MENU>======================== <1> Download Program To SDRAM And Run

<2> Download To Flash

<3> Change Boot Parameter <4> Exit To Main Menu

===============================================================

Enter your choice(1-4): _

1Downloading via serial port application files to memory and starting them.

Enter <1> in serial port sub-menu and the system will download, via serial port, application files from the configuration PC to memory using Xmodem protocol. It then decompresses them and runs start file upon skipping to program ingress. Refer to Upgrading Boot main system (LargeBootrom) through serial port for loading details.

2Downloading to Flash

Enter <2> in serial port sub-menu and the system will download the main boot file to Flash, via serial port using Xmodem protocol.

3Modifying serial port parameters

Enter <3> in serial port sub-menu to modify baudrate of the serial port on RPU card. The following information is displayed:

========================<BAUDRATE SET>=======================
Note: Change The HyperTerminal's Baudrate Accordingly.
-------------------	<BaudrateAvaliable>-----------------------
<1> 9600(Default)
<2> 19200
<3> 38400
<4> 57600
<5> 115200

===============================================================

Enter Your Choice(1-5):

The information indicates you to choose desired baudrate. By default, the baudrate is 9600 bps. Select a target item and press <Enter>. When you select <5>, the system prompts

Enter your choice(1-5): 5

Change The BaudRate On PC Side First!

Change baudrate of the configuration PC as per the prompts. Disconnect the system and resume dialup, to make the new parameter take effect. See Modifying serial port parameters, for more details.

4Returning to Boot main menu

5Enter <4> in serial port sub-menu to return to Boot main menu.