HP 6000 Router manual Entering Ethernet port sub-menu, Available Boot Device wancom

Software Maintenance Overview 41

Entering Ethernet port sub-menu

Enter <4> in Boot main menu to turn to Ethernet port sub-menu. The following information is displayed:

=======================<NETWORK SUB-MENU>====================== <1> Download Program To SDRAM And Run

<2> Download Main Boot File To Flash <3> Download Backup Boot File To Flash <4> Download Secure Boot File To Flash <5> Change Boot Parameter

<6> Exit To Main Menu

<Be Sure To Modify Parameter Before Downloading! >

===============================================================

Enter your choice(1-6):

1Downloading port application files to memory and starting them via Ethernet port.

Enter <1> in Ethernet port sub-menu and the system will download via Ethernet port from the host to memory. It then decompresses them and runs start file upon skipping to program ingress.

2Downloading the main boot file to Flash via Ethernet port

Enter <2> in Ethernet port sub-menu and the system will download the main boot file from the host to Flash.

3Downloading the backup boot file to Flash via Ethernet port

Enter <3> in Ethernet port sub-menu and the system will download the backup boot file from the host to Flash via Ethernet port.

4Downloading the secure boot file to Flash via Ethernet port

Enter <4> in Ethernet port sub-menu and the system will download the secure boot file from the host to Flash via Ethernet port.

5Modifying Ethernet port parameters

Enter <5> in Ethernet port sub-menu to modify parameters of the Ethernet port. The following information is displayed:

Two protocols for download, tftp & ftp. You can modify the flags following the menu.

tftp--0x80, ftp--0x0.

Available Boot Device: [wancom]

boot device	:	wancom0Ethernet device name
processor number:		0
host name	: host
file name	: c:/share/system.bin Host file name
inet on ethernet (e):
inet on backplane		(b):
host inet (h)	: 192.168.0.91Host IP address
gateway inet (g):
user (u)	: FTP username
ftp password (pw)		(blank = use rsh): taotaoFTP user password
flags (f)	: 0x0(FTP)/0x80(TFTP) File transfer type
target name (tn):

startup script (s):