54CHAPTER 6: TROUBLESHOOTING
■Terminal emulation: VT100
If the parameter settings do not match the above values, please modify the configuration.
Troubleshooting
Application Software
Upgrade
Fault 1 | Start the Router, upgrade the software with the TFTP approach, and the system | ||
| displays the following prompt: | ||
| DownLoad Program To Flash Through Net Port | ||
| boot device |
| : ErrDev |
| unit number |
| : 0 |
| processor number | : 0 | |
| file name |
| : 6000.bin |
| inet on ethernet (e) | : 1.1.1.1 | |
| host inet (h) | : 1.1.1.2 | |
| user (u) |
| : user |
| ftp password (pw) | : password | |
| flags (f) |
| : 0x80 |
| Loading... | Loading Failed | |
| Troubleshooting |
| |
| The fault occurs due to the wrong boot device 'ErrDev' using a wrong application. | ||
| To solve the problem, just change “ErrDev” to “wancom” which is the application | ||
| upgrade device of 6000 Router. | ||
Fault 2 | Start the Router, upgrade the application software with the TFTP approach, and | ||
| the following information is displayed: | ||
| DownLoad Program To Flash Through Net Port | ||
| boot device |
| : wancom |
| unit number |
| : 0 |
| processor number | : 0 | |
| file name |
| : 6000.bin |
| inet on ethernet (e) | : 1.1.1.1 | |
| host inet (h) | : 1.1.1.2 | |
| user (u) |
| : user |
| ftp password (pw) | : password | |
| flags (f) |
| : 0x80 |
Attached TCP/IP interface to wancom0.
Subnet Mask: 0xffffffc0
Attaching network interface lo0... done.
Loading... Error code 2: Access violation
tftpGet: Error occurred while transferring the file.
A bad file or twisted pair doesn't link correctly!Loading Failed
