HP 6000 Router manual Installing the Router

28CHAPTER 2: INSTALLING THE ROUTER

Connecting the AUX Follow these steps to connect the AUX cable: cable

1Insert the RJ45 connector of the cable into the AUX port on the RPU.

2Insert the DB25 or DB9 connector into the serial port of the analog modem. AUX port is usually used for remote configuration or dial-up backup. Therefore, you need to connect the local modem to the remote modem via PSTN and then to the remote equipment.

Verify Installation During router installation, you must verify the installation each time you power on the Router, making sure that:

■Enough clearance has reserved around the Router for adequate dissipation and the cabinet is stable enough.

■The correct power supply is used.

■The connection of the PGND wire of the Router is correct and secure.

■The connections with other devices, such as, the console terminal, are correct.

It is very important for you to check the router installation, as the secure connection, well grounding, and use of the correct power supply are essential to the normal operation of the Router.