HP 6120 TFTP: Copying a Configuration File to a Remote Host, test

Switch Memory and Configuration

Multiple Configuration Files

copy config < src-file> xmodem < pc unix > [oobm]	6-40
copy xmodem config < dest-file> < pc unix > [oobm]	6-40

TFTP: Copying a Configuration File to a Remote Host

Syntax: copy config < src-file> tftp < ip-addr> < remote-file> < pc unix > [oobm]

This is an addition to the copy tftp command options. Use this command to upload a configuration file from the switch to a TFTP server.

The oobm parameter specifies that the copy operation will go out from the out-of-band management interface. If this parameter is not specified, the copy operation goes out from the data interface. Refer to Appendix G, “Network Out-of- Band Management” in this guide for more information on out-of-band management.

For more on using TFTP to copy a file to a remote server, refer to “TFTP: Copying a Configuration File to a Remote Host” on page A-26.

For example, the following command copies a startup-config file named test-

01 from the switch to a (UNIX) TFTP server at IP address 10.10.28.14:

ProCurve(config)# copy config test-01 tftp 10.10.28.14 test-01.txt unix

6-38