HP 6120 Ports:, Action, Figure B-20.How To Select a Local Exit Port

Monitoring and Analyzing Switch Operation

Traffic Mirroring

Switch Configuration - Network Monitoring Port

Monitoring Enabled [No] : Yes				Move the cursor to the Monitoring Port parameter,
Monitoring Port :				then use the Space bar to select the local exit port.
		D5
Monitor : Ports
Port	Type	Action	Port	Type	Action
----	--------- + -------		----	--------- +	-------
D1	1000X		D14	1000X
D2	1000X		D15	1000X
D3	1000X		D16	1000X
D4	1000X		1	1000T
D5	1000X		2	1000T
D6	1000X		3	1000T
D7	1000X		4	1000T
D8	1000X		S1

Actions->	Cancel			Edit	Save	Help
Select the port that will act as the Monitoring Port.							toggle field choices,
Use arrow	keys	to	change field selection, <Space> to
and <Enter> to		go	to Actions.

Figure B-20. How To Select a Local Exit Port

5.Use the Space bar to select the port to use for sending mirrored traffic to a locally connected traffic analyzer or IDS. (The selected interface must be a single port. It cannot be a trunk.) In this example, port D5 is selected as the local exit port.

6.Highlight the Monitor field and use the Space bar to select the interfaces to mirror:

Ports: Use for mirroring ports, or static trunks.

7.Use the down arrow key to move the cursor to the Action column for the individual port interfaces and position the cursor at a port, or trunk you want to mirror.

B-31