HP 6120 manual 571

Network Out-of-Band Management (OOBM)

Tasks

Switch	41# config
Switch	41(config)# vlan 1
Switch 41(vlan-1)# ip address 10.1.129.7/20				Set up IP address on data network.
Switch 41(vlan-1)# end					Exit back to manager context.
Switch 41# show oobm				Look at default OOBM configuration.
Global Configuration		: Yes
OOBM	Enabled
OOBM	Port Type	: 10/100TX
OOBM	Interface Status	: Up			Defaults look appropriate.
OOBM	Port	: Enabled
OOBM	Port Speed	: Auto
Switch	41# config
Switch	41(config)# oobm				Go to OOBM context and
Switch	41(oobm)# ip address 10.255.255.41/24				add IP address and
Switch	41(oobm)# ip default-gateway 10.255.255.1				default gateway.
Switch	41(oobm)# end				Exit back to manager context.
Switch 41# ping 10.1.131.43			Ping server in this rack (on data network).
10.1.131.44 is alive, time = 19 ms
Switch 41# ping 10.1.131.51					Ping server in adjacent rack.
10.1.131.51 is alive, time = 15 ms
Switch 41# ping 10.255.255.42					Ping switch in adjacent rack.
The destination address is unreachable.			Oops! It’s on the management network.
Switch 41# ping source oobm 10.255.255.42				Go through the management port
10.255.255.42 is alive, time = 2 ms					and it works fine.
Switch	41#

G-17