HP 6120 Syntax:, index_name, Figure 13-4.Assigning a Community to a Group Access Level

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

Syntax: [no] snmpv3 community

This command maps or removes a mapping of a community name to a group access level. To remove a mapping you, only need to specify the index_name parameter.

index <index_name>

This is an index number or title for the mapping. The values of 1-5 are reserved and can not be mapped.

name <community_name>

This is the community name that is being mapped to a group access level.

sec-name<security_name>

This is the group level to which the community is being mapped. For more information refer to “Group Access Levels” on page 13-12.

tag <tag_value>

This is used to specify which target address may have access by way of this index reference.

Figure 13-4shows the assigning of the Operator community on MgrStation1 to the CommunityOperatorReadWrite group. Any other Operator only has an access level of CommunityOperatorReadOnly

Add mapping to allow write access for

Operator community on MgrStation1

Two Operator Access Levels

Figure 13-4. Assigning a Community to a Group Access Level

13-13