HP 6120 show alias

Using the Command Line Interface (CLI)

CLI Control and Editing

ProCurve(config)# show int custom 1-4 port name:4 type vlan intrusion speed enabled mdi

Status and Counters - Custom Port Status

Port Name		Type	VLAN	Intrusion	Speed	Enabled MDI-mode
				Alert
---- ----------		----------	-----	---------	-------	------- --------
1	Acco	100/1000T	1	No	1000FDx	Yes	Auto
2	Huma	100/1000T	1	No	1000FDx	Yes	Auto
3	Deve	100/1000T	1	No	1000FDx	Yes	Auto
4	Lab1	100/1000T	1	No	1000FDx	Yes	Auto

ProCurve(config)# alias sic “show int custom 1-4 port name:4 type vlan intrusion speed enabled mdi”

ProCurve(config)#

ProCurve(config)# sic

Status and Counters - Custom Port Status

Port Name		Type	VLAN	Intrusion	Speed	Enabled MDI-mode
				Alert
---- ---------- ----------			-----	---------	-------	------- --------
1	Acco	100/1000T	1	No	1000FDx	Yes	Auto
2	Huma	100/1000T	1	No	1000FDx	Yes	Auto
3	Deve	100/1000T	1	No	1000FDx	Yes	Auto
4	Lab1	100/1000T	1	No	1000FDx Yes		Auto
Figure 4-12. Example of Using the Alias Command with show int custom
N o t e		Remember to enclose the command being aliased in quotes.

Command parameters for the aliased command can be added at the end of the alias command string. For example:

ProCurve(config)# alias sc “show config”

ProCurve(config)# sc status

To change the command that is aliased, re-execute the alias name with new command options. The new options are used when the alias is executed.

To display the alias commands that have been configured, enter the show alias command.

4-19