Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

ProCurve(config)# show telnet

Telnet Activity

--------------------------------------------------------

Session

: ** 1

Privilege: Manager

From

: Console

To

:

-------------------------------------------------------

Session

:

** 2

Privilege:

Manager

From

:

12.13.14.10

To

:

15.33.66.20

-------------------------------------------------------

Session

:

** 3

Privilege:

Operator

From

:

2001:db7:5:0:203:4ff:fe0a:251

To

:

2001:db7:5:0:203:4ff1:fddd:12

Figure 7-3. Example of show telnet Command Displaying Resolved IP Addresses

Reconfigure Web Browser Access. In the default configuration, web browser access is enabled.

Syntax: [no] web-management [listen <oobm data both>]

Use the no version of the command to disable inbound HTTP access.

The listen parameter is available only on switches that have a separate out-of-band management port. Values for this parameter are:

•oobm — inbound HTTP access is enabled only on the out-of-band management port.

•data — inbound HTTP access is enabled only on the data ports.

•both — inbound HTTP access is enabled on both the out-of-band management port and on the data ports. This is the default value.

Refer to Appendix G, “Network Out-of-Band Management” in this guide for more information on out-of-band management.

The listen parameter is not available on switches that do not have a separate out-of-band management port.

7-7