HP 6120 Configuring SNMPv3 Notifications, Syntax:, snmpv3 user, snmpv3 group, <notify_name, snmpv3 enable, snmpv3 notify, no snmpv3 notify

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

Configuring SNMPv3 Notifications

The SNMPv3 notification process allows messages that are passed via SNMP between the switch and a network management station to be authenticated and encrypted.

To configure SNMPv3 notifications, follow these steps:

1.Enable SNMPv3 operation on the switch by entering the snmpv3 enable command (see “SNMP Version 3 Commands” on page 13-7).

When SNMPv3 is enabled, the switch supports:

•Reception of SNMPv3 notification messages (traps and informs)

•Configuration of initial users

•(Optional) Restriction of non-SNMPv3 messages to “read only”

2.Configure SNMPv3 users by entering the snmpv3 user command (see “SNMPv3 Users” on page 13-8). Each SNMPv3 user configuration is entered in the User Table.

3.Assign SNMPv3 users to security groups according to their level of access privilege by entering the snmpv3 group command (see “Assigning Users to Groups” on page 13-11).

4.Define the name of an SNMPv3 notification configuration by entering the snmpv3 notify command.

Syntax: [no] snmpv3 notify <notify_name> tagvalue <tag_name>

Associates the name of an SNMPv3 notification configuration with a tag name used (internally) in SNMPv3 commands. To delete a notification-to-tag mapping, enter no snmpv3 notify <notify_name>.

notify < notify_name >

Specifies the name of an SNMPv3 notification configuration.

tagvalue < tag_name >

Specifies the name of a tag value used in other SNMPv3 commands, such as snmpv3 targetaddress params taglist <tag_name> in Step 5.

13-24