Port Status and Configuration

Using Friendly (Optional) Port Names

Syntax: [no] module <slot>

Allows removal of the module configuration in the configuration file after the module has been removed. Enter an integer between 1 and 12 for <slot>.

For example:

ProCurve(config)# no module 3

N o t e

This does not change how hot-swap works.

Operating Notes

The following restrictions apply:

■

■

■

The slot being cleared must be empty

There was no module present in the slot since the last boot

If there was a module present after the switch was booted, the switch will have to be rebooted before any module (new or same) can be used in the slot.

■This does not clear the configuration of a module still in use by the switch.

10-30