HP 6120 Creating a New Startup-ConfigFile, Renaming an Existing Startup-ConfigFile

Switch Memory and Configuration

Multiple Configuration Files

Renaming an Existing Startup-Config File

Syntax: rename config < current-filename > < newname-str >

This command changes the name of an existing startup- config file. A file name can include up to 63, alphanumeric characters. Blanks are allowed in a file name enclosed in quotes (“ “ or ‘ ‘). (File names are not case-sensitive.)

For redundant management systems, renaming a config file affects both the active management module and the standby management module, unless redundancy is disabled or the standby module failed selftest.

Creating a New Startup-Config File

The switch allows up to three startup-config files. You can create a new startup-config file if there is an empty memory slot or if you want to replace one startup-config file with another.

Syntax: copy config < source-filename> config < target-filename> [oobm]

6-33