HP 6120 Parameters, Web: Viewing Port Status and Configuring Port, Configuration, Figure 10-13.Example of Displaying the Current MDI Configuration

Port Status and Configuration

Viewing Port Status and Configuring Port Parameters

Per-Port MDI

Configuration

Figure 10-13. Example of Displaying the Current MDI Configuration

Per-Port MDI

Operating Mode

Figure 10-14. Example of Displaying the Current MDI Operating ModeWeb: Viewing Port Status and Configuring Port

Parameters

In the web browser interface:

1.Click on the Configuration tab.

2.Click on [Port Configuration].

3.Select the ports you want to modify and click on [Modify Selected Ports].

4.After you make the desired changes, click on [Apply Settings].

Note that the web browser interface displays an existing port trunk group. However, to configure a port trunk group, you must use the CLI or the menu interface. For more on this topic, refer to Chapter 11, “Port Trunking” .

10-22