5.Lift the fan sink from the processor (2). Figure 6-35Removing the fan sink

When reinstalling the fan sink, make sure that its bottom has been cleaned with an alcohol wipe and fresh thermal grease has been applied to the top of the processor.

CAUTION: Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the fan sink on the processor. Failure to do so could result in damage that requires replacing the system board.

108 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis

Page 119
Image 119
HP 8300e D8C26UTABA manual