Hood Sensor
Description | Spare part number |
|
|
Hood sensor | |
|
|
1.Prepare the computer for disassembly (Preparation for Disassembly on page 204).
2.Remove the computer access panel (Access Panel on page 205).
3.Remove the optical drive (Removing the Optical Drive on page 216).
4.Unplug the hood sensor cable from the white system board connector labeled HSENSE (1) and remove the cable from the white clip mounted on the inside chassis wall.
5.Slide the hood sensor into the chassis to remove it from its slot (2). Disengaging the hood sensor from the chassis may require use of a screwdriver or similar tool.
Figure
To install the hood sensor, reverse the removal procedures.
Hood Sensor 235