6.Install the screw through the interior of the front of the chassis into the front bezel. The screw hole is located on the left edge of the chassis next to the top hard drive bay.

Figure 6-4Installing the Front Bezel Security Screw

7.Replace the access panel.

8.Reconnect the power cord and turn on the computer.

9.Lock any security devices that were disengaged when the access panel was removed.

76 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis

Page 87
Image 87
HP 8300e D8C26UTABA manual