Bezel Blanks

Description

Spare part number

 

 

3.5-inch bezel blank

583653-001

 

 

5.25-inch bezel blank, optical drive

570838-001

 

 

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the access panel (Computer Access Panel on page 120)

2.Remove the front bezel (Front Bezel on page 121)

3.To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it

(2).

Figure 7-5Removing a Bezel Blank

124 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis