HP 8300e D8C26UTABA manual Power Switch/LED Assembly

Power Switch/LED Assembly

Description	Spare part number
Power switch/LED assembly	646828-001

1.Prepare the computer for disassembly (Preparation for Disassembly on page 72).

2.Remove the access panel (Computer Access Panel on page 120).

3.Remove the front bezel (Front Bezel on page 121).

4.Remove the front fan (Front Fan Assembly on page 144).

5.Disconnect the cable from the system board connector labeled PB/LED.

6.With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it from the chassis.

Figure 7-29Removing the power switch/LED

7.Pull the assembly away from the chassis while threading the cable through the hole in front of the chassis.

Power Switch/LED Assembly 147