Optical Drive Rail
Description | Spare part number |
|
|
Optical drive rail (green plastic piece on drive) | |
|
|
The optical drive rail sits behind the USB ports on the front of the chassis.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 204).
2.Remove the computer access panel (Access Panel on page 205).
3.Remove the optical drive (Removing the Optical Drive on page 216).
4.Remove the hard drive (Hard Drive on page 219).
5.Remove the two Torx screws that secure the rail to the chassis (1), lift the tab (2) on the rail, slide the rail toward the rear of the unit (3), and then pull the rail up and out of the chassis.
Figure
To install the optical drive rail, reverse the removal procedures.
224 Chapter 9 Removal and Replacement Procedures