System Board
Description | Spare part number |
|
|
System board (includes thermal material) | |
|
|
1.Prepare the computer for disassembly (Preparation for Disassembly on page 160).
2.Remove the access panel (Access Panel on page 161).
3.When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board:
●Memory modules (Memory on page 166)
●Expansion cards (Expansion Card on page 169)
●Heat sink (Heat sink on page 194)
●Processor (Processor on page 196)
4.Remove the baffle from the chassis (Fan duct on page 187).
5.Remove the fan from the chassis (Front Fan Assembly on page 188).
6.Rotate the drive cage to its upright position.
7.Rotate the power supply to its full upright position.
8.Disconnect all data and power cables from the system board.
9.Disconnect the balance of the cables from the system board.
10.Remove the eight Torx T15 screws (1) that secure the system board to the chassis.
System Board 201