10.From the inside of the chassis, slide the fan out from underneath the chassis lip, and then remove the fan.

Figure 9-38Removing the rear fan

To install the rear fan, reverse the removal procedure.

Antennas

Description

Spare part number

 

 

Antenna Hardware Kit

646811-001

 

 

Two antennas are secured to chassis – one on the front, one on the back. You must remove all other components to remove the antennas.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 204).

2.Remove the computer access panel (Access Panel on page 205).

3.Remove the optical drive (Removing the Optical Drive on page 216).

4.Remove the front fan (Front Fan on page 215).

5.Remove the hard drive (Hard Drive on page 219).

6.Remove the optical drive rail (Optical Drive Rail on page 224).

7.Remove the heat sink (Heat sink on page 228).

8.Remove the system board (System Board on page 238).

9.Remove the rear fan (Rear Fan on page 240).

Antennas 241