Rear Fan
Description | Spare part number |
|
|
Rear fan | |
|
|
The rear fan is secured to the rear right corner of the chassis. You must remove the system board before you can remove the rear fan.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 204).
2.Remove the computer access panel (Access Panel on page 205).
3.Remove the optical drive (Removing the Optical Drive on page 216).
4.Remove the front fan (Front Fan on page 215).
5.Remove the hard drive (Hard Drive on page 219).
6.Remove the optical drive rail (Optical Drive Rail on page 224).
7.Remove the heat sink (Heat sink on page 228).
8.Remove the system board (System Board on page 238).
9.From the outside of the chassis, remove the four Phillips screws that secure the fan to the chassis.
Figure
240 Chapter 9 Removal and Replacement Procedures