HP 8300e D8C26UTABA manual

10.To remove the front antenna, from the inside of the front of the chassis, remove the antenna from the clips built into the base pan.

Figure 9-39Removing the front antenna – inside

11.From the outside of the front of the chassis, remove the two Torx T8 screws (1) that secure the antenna to the chassis.

12.Pull the antenna out of the clips on the front of the chassis (2), and then pull the antenna out of the hole it routes through (3).

Figure 9-40Removing the front antenna – outside

242 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis