Hood Sensor

Description

Spare part number

 

 

Hood sensor

638816-001

 

 

The hood sensor is attached in a slot in the rear of the chassis.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 160).

2.Remove the access panel (Access Panel on page 161).

3.Unplug the sensor cable from the system board connector labeled HSENSE (1).

4.Slide the hood sensor straight out of the notch in the chassis (2).

NOTE: A flat blade screwdriver can be used to push the hood sensor out of the slot.

Figure 8-31Removing the hood sensor from the chassis fan

To install the hood sensor, reverse the removal procedure.

190 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Page 201
Image 201
HP 8300e D8C26UTABA manual Hood Sensor