9.Gently slide the drive into the uppermost available bay until it snaps into place. When the drive is properly inserted, the drivelock will secure it. Repeat this step for each drive.
Figure
CAUTION: The bottom
10.Reconnect all power and data cables to the drives in the
11.Remove the bezel subpanel as described in Bezel Blanks on page 77.
CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel.
12.Reposition the bezel blanks within the subpanel in the proper orientation for the desktop configuration.
Changing from a Minitower to a Desktop Configuration 115