
HP Embedded Web Server features
The following sections describe the basic screens of the embedded Web server.
Status tab
Provides product, status, and configuration information.
●Device Status: Shows the product status and shows the life remaining of HP supplies, with 0% indicating that a supply is empty.
●Supplies Status: Shows the approximate percent life remaining of HP Supplies, with
●Device Configuration: Shows the information found on the product Configuration page.
●Network Summary: Shows the information found on the product Network Configuration page.
●Reports: Allows you to print the PCL, PCL6, PS Font Lists, and the supplies status page that the product generates.
●Color Usage Job Log: Shows user color print jobs on a
●Event Log: Shows a list of all product events and errors.
System tab
Provides the ability to configure the product from your computer.
●Device Information: Allows you to name the product and assign an asset number to it. Enter the name for the primary contact who will receive information about the product.
●Paper Setup: Allows you to change the
●Print Quality: Allows you to change the print quality defaults for the product, including calibration settings.
●Print Density: Allows you to change the contrasts, highlights, midtones, and shadows values for each supply.
●Paper Types: Allows you to configure print modes that correspond to the paper types that the product accepts.
●System Setup: Allows you to change the system defaults for the product.
●Service: Allows you to start the cleaning procedure on the product.
●Product Security: Allows you to set a password for making changes to configuration items.
NOTE: The Settings tab can be
ENWW | Use the HP Embedded Web Server 95 |