HP D6028-90004 manual Connecting an Optional AC/DC Adapter

Chapter 3Hardware Installation and Configuration

NOTE	The I2C cable is both color coded and keyed to plug in to the
	I2C/IPMB connector only one way. HP does not support
	installations of the HP TopTools Remote Control card in
	systems that do not include the I2C/IPMB feature. Currently,
	these include systems such as the HP NetServer LC 3, LH 3
	and LH 4. To find out if your server includes an I2C/IPMB
	connector, refer to your server documentation.

Connecting an Optional AC/DC Adapter

In addition to the battery pack, you may purchase an external AC/DC 5-volt adapter and use it to supply power to the HP TopTools Remote Control card even if the server’s power is down. The optional AC/DC adapter (HP part number D6138A) is available from your authorized HP dealer. HP recommends use of the adapter when you want to extend the card’s remote power-on feature beyond the limits of the battery pack’s capability (30 to 60 minutes).

100-240VAC	5V (±5%)
50-60Hz
	2.0AMax.

Figure 3-4. AC/DC Adapter for HP TopTools Remote Control card

1.Plug the optional AC/DC adapter into an available power receptacle or Uninterruptible Power Supply (UPS).

2.Plug the power supply cable into the 5-volt DC input on the rear bracket of the HP TopTools Remote Control card.

20