Chapter 4 | Setting Up the Remote Connection |
Figure 4-10. Define the Dial-Up Server Type
7.Click the "TCP/IP Settings" button (see Figure 4-11). Select the "Server assigned IP address" option. The client will automatically get an IP Address from the HP TopTools Remote Control card. Check "Specify name server addresses" and make sure all DNS and WINS entry fields are set to zero (0). Uncheck "Use default gateway on remote network."
Click OK.
NOTE | The card derives the address using the PPP IP Address of the |
| card which it increments by "1". If the resulting address is |
| equal to "0" or "255," it is incremented by "1" again. |
| |
32