HP dx5150 Numeric Codes and Text Messages (Continued)

POST Error Messages

Numeric Codes and Text Messages (Continued)

Code/Message Probable Cause Recommended Action

Memory test fail	If POST detects an error
	during memory testing,
	additional information
	appears giving specifics about
	the type and location of the
	memory error.

Shut down the system, reseat the DIMMs, and reboot the system. If the problem persists, replace the DIMMs.

Override enabled–	If the system cannot boot using None.
Defaults loaded	the current CMOS
	configuration, the BIOS can
	override the current
	configuration with a set of
	BIOS defaults designed for the
	most stable, minimal-
	performance system.

Error: Non-System disk or disk error. Replace and press any key when ready

The BIOS was unable to find a suitable boot device. This may mean an unitialized or corrupt ATA flash.

Shut down the system, ensure that the power and data cables of all storage devices are plugged in properly, and reboot the system.

Ensure all removable media have been removed.

Warning: CPU fan	CPU fan weak (RPM < 1000)
has failed.	or not turning.

Ensure that the CPU fan power cable is connected. If the problem persists, replace the fan.

Warning: System Fan	System fan weak (RPM <
has failed.	1000) or not turning.

Ensure that the System fan power cable is connected. If the problem persists, replace the fan.

Memory is running at	When two same size
Single Channel Mode	memories are put in slot 1 and
	3, this message will be
	displayed.

For optimal performance, shut down the system and move the second DIMM from the XMM3 to the XMM2 socket.

Service Reference Guide, dx5150 361685-001 C–3