Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

7.10Power Switch Assembly

1.Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).

2.Remove the front bezel (Section 7.4, “Front Bezel,”).

3.Rotate the drive cage to its full open position.

4.Disconnect the power switch/LED cable from the system board.

5.Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the switch assembly out of the chassis 2.

To install the power switch assembly, reverse the removal procedure.

 

7–22

361685-001

Service Reference Guide, dx5150