Removal and Replacement Procedures— Microtower (MT) Chassis

6.9 Drives

The computer supports up to six drives that may be installed in various configurations.

This Section describes the procedure for replacing or upgrading the storage drives. A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive.

ÄCAUTION: Make sure personal files on the hard drive are backed up to an external storage device before removing the hard drive. Failure to do so will result in data loss. After replacing the primary hard drive, you will need to run the Restore CD to load the factory-installed files.

6.9.1Drive Positions

Drive Positions
Item

Description

Item

Description

 

 

 

 

1

Optical drive*

4

Bay for optional 3.5" drive

 

 

 

 

2

Second optical drive

5

Primary hard drive

 

 

 

 

3

Diskette drive (optional)

6

Optional hard drive

* CD-ROM, CD-R/RW, DVD-ROM, DVD-R/RW, or CD-RW/DVD Combo drive.

 

Service Reference Guide, dx5150

361685-001

6–13