![](/images/backgrounds/287305/hp-personal-computer-dx5150-users-manual-54816740x1.png)
Desktop Management
✎If you do not press the F10 key at the appropriate time, you must restart the computer and press and hold the F10 key again to access the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error
4.In the MBR Security box, press the up or down arrows to select Enabled or Disabled.
5.To accept the changes, press Enter. To abort the changes, press the Esc key.
When MBR Security is enabled, the BIOS prevents any changes being made to the MBR of the current bootable disk while in
✎Most operating systems control access to the MBR of the current bootable disk; the BIOS cannot prevent changes that may occur while the operating system is running.
Each time the computer is turned on or restarted, the BIOS compares the MBR of the current bootable disk to the previously saved MBR. If changes are detected and if the current bootable disk is the same disk from which the MBR was previously saved, the following message is displayed:
1.Press any key to enter Setup to configure MBR Security.
2.Upon entering Computer Setup, you must disable the MBR Security feature. You must know the supervisor password, if one exists.
If changes are detected and if the current bootable disk is not the same disk from which the MBR was previously saved, the following message is displayed:
1.Press any key to enter Setup to configure MBR Security.
2.Upon entering Computer Setup, you must disable the MBR Security feature. You must know the supervisor password, if one exists.
In the unlikely event that the previously saved MBR has been corrupted, the following message is displayed:
1.Press any key to enter Setup to configure MBR Security.
2.Upon entering Computer Setup, you must disable the MBR Security feature. You must know the supervisor password, if one exists.
| Service Reference Guide, dx5150 |