Removal and Replacement Procedures— Microtower (MT) Chassis

6.3Access Panel

1.Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).

ÄCAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet.

2.Loosen the captive thumbscrew 1 that secures the access panel to the computer chassis.

3.Slide the access panel 2 back about 2.5 cm (1 inch), then lift it off the unit.

✎You may want to lay the computer on its side to install internal parts. Make sure the side with the access panel and pull grip is facing up.

To install the access panel, reverse the removal procedure.

 

Service Reference Guide, dx5150

361685-001

6–3