Emergency stop buttons | HP L65500 manual

Safety precautions

Label	Explanation

	When the printer is printing, the printhead carriage travels back
	and forth across the substrate.

Beware of this moving part.

Emergency stop buttons

There are four emergency stop buttons distributed around the printer. If an emergency occurs, simply push one of the emergency stop buttons to stop all printing processes. A system error message is displayed on the front panel, and the fans turn at maximum speed. Ensure that all emergency stop buttons are released before restarting the printer.

4 Chapter 1 Safety precautions

ENWW

Image 10

HP L65500 manual Emergency stop buttons

Contents

HP Designjet L65500 Printer Trademarks Table of contents Software maintenance Front-panel error messages When you need help Enww Safety precautions General safety guidelines Fire hazard Label Explanation Identifies the main earth terminal Emergency stop buttons Check printer status Printer statusPrinter alerts Printer calibration Align the printheads Substrate-advance compensation Troubleshoot printhead alignment Color calibration Color calibration Ink restrictions Color profiles Maintain the printheads Hardware maintenanceMaintain the ink cartridges Maintain the substrates Clean the carriage cover Check the printheads Clean the carriage rails Hardware maintenance Clean the exterior of the printer Clean the ink deposits Clean the line sensor and aerosol inlets Clean the main roller Clean the substrate edge holders Clean the printheads Clean the pinch wheelsClean the platen Clean the substrate-advance sensor Clean the temperature sensors Maintain the printhead primers Replace the carriage oiler foams Hardware maintenance Replace the line sensor box Replace the printhead cleaning roll and aerosol filters Replace the printhead cleaning roll Replace the printhead cleaning roll and aerosol filters Replace the aerosol filters Move the printer Printer maintenance kits Cleaning kit Software maintenance Maintain the HP Internal Print Server Update the firmware Substrate cannot be loaded successfully Troubleshoot substrate issuesSubstrate has jammed Substrate is not attached to the input core Substrate sticks to the platen Ink is still wet when the substrate emergesThere are ink marks on the substrate General advice Troubleshoot print-quality issuesBanding Banding Colors are misaligned Colors are misaligned vertically Print is grainy Colors are misaligned horizontally Edges of objects are rough or blurred Print is smudgedSubstrate is not flat Colors look washed out Colors are inaccurate Cannot insert a printhead Troubleshoot ink cartridge and printhead issuesCannot insert an ink cartridge Front panel recommends replacing or reseating a printhead Printhead has overheated Incorrect printhead cleaning roll errorsPrinthead has damaged the substrate Printer seems slow Troubleshoot other issuesPrinter does not print HP Internal Print Server cannot detect the printer Print job files have not been properly deleted Upgrade the HP Internal Print ServerColor calibration fails Front-panel error messages Front-panel errors 2Numerical error codes Icon, then Carriage beam position Carriage system recovery Correctly inflated. The substrate will be unloaded HP Proactive Support When you need helpDocumentation HP Customer Care HP Customer Care Centers Service information Preset creation flowchart Index Enww