Interoperability Testing
FTAM Interoperability Testing
FTAM Interoperability Testing
This procedure invokes FTAM through osidiag to provide as much information as possible about errors that might occur.
FTAM Connectivity Test
The steps below describe how to test FTAM connectivity between the local and remote node.
1.From root, type osidiag and select “FTAM TESTS.”
2.Create a result file.
3.Select “Connect” from the FTAM menu.
4.Enter Initiator Identification (your login information for the remote node).
•Change ID field from local login name to remote unless login on remote is the same.
•Enter initiator password associated with remote login.
5.Press Done.
6.Enter Presentation Address for remote node.
7.Go to the “FTAM File Transfer Test” on page 15.
14 | Chapter 1 |
