|
| Interoperability Testing |
|
| Reason and Refuse Codes |
|
|
|
Code | Meaning | Action |
|
|
|
(0x1a) | Network Reset from NS User (Resynch) | X.25 diagnostic indicates |
| Network connection was reset. | resynchronization was |
| requested. | |
|
| |
|
|
|
(0x20) | Undefined reason, unknown origin Indicates | Check for down card on local |
| some X.25 problem. | or remote, switch, or facilities |
|
| negotiation. |
|
|
|
(0x21) | Invalid Parameter (OTS Kernel) | Check for NSAPs that are too |
| An encoded parameter is invalid. | large or missing. |
|
| |
|
|
|
(0x22) | External Protocol Error (OTS Kernel) | An error should be logged |
| Failure decoding facility information. | describing the protocol error. |
|
| |
|
|
|
(0x23) | Invalid Internal State (OTS Kernel) | An error should be logged |
| A network primitive was received or is to be | describing the protocol error. |
|
| |
| sent in an unexpected state. |
|
|
|
|
(0x24) | Facility or Data Field Overflow (OTS Kernel) | An error should be logged |
| Processing of the facility fields indicated | describing the protocol error. |
|
| |
| failure |
|
|
|
|
(0x41) | X.25 Facility Requested not Allowed | Determine the facilities |
| The configured X.25 facilities do not match | available and reconfigure |
| OTS and X.25 to use the | |
| those of the provider. | |
| appropriate set. | |
|
| |
|
|
|
(0x42) | Could not Access X.121 Address of Remote | Reset the remote system or |
| The X.121 address mapped to the NSAP you | reconfigure the OTS routing |
| table appropriately. | |
| specified is incorrect or the remote system is | |
|
| |
| down. |
|
|
|
|
(0x81) | Remote Transport Entity Congestion at |
|
| Connect Time |
|
| Indicates that no problems were detected |
|
| with the Transport layer, but user of service |
|
| may have sent an abort or other higher level |
|
| error. |
|
|
|
|
Chapter 1 | 47 |