Interoperability Testing

Running Session Tests (Server Mode)

Running Session Tests (Server Mode)

If the remote is not capable of receiving connections, or you wish to test the remote’s ability to establish connections, follow these instructions.

1.From root, type /opt/ots/bin/osidiag -w 300 (the -w 300 allows 300 seconds to get the client ready once the server is started), and select “Session Tests”.

2.Create a result file.

3.Select “Server...” from the Test Case menu.

4.Generate the connection from the client side via the remote application. Follow steps in “Running APRI Tests (Client Mode)” on page 20, if an HP system.

5.Check the “TEST STATUS” near the end of the report. If the status is “PASSED,” you have successfully communicated with the remote node and are finished with this section.

If the staus is “FAILED,” see “Interpreting Session Errors” on page 28.

If you find the error, rerun the server test, then rerun the client test on remote to connect to this server.

If you cannot find the error, enable tracing on the local node. See “Tracing and Logging through /opt/ots/bin/osidiag” on page 62.

Chapter 1

27