HP UX 11i v2 Networking Software manual ES/IS Command Options, Option Description

		Using OSI and OTS Tools
		Dynamic Routing Commands
Table 3-4		ES/IS Command Options
	Option	Description
	-r	Reverse Charge Request off. Specifying this option prohibits outgoing calls
		from requesting reverse charging. This is the default.
	-R	Reverse Charge Request on. Specifying this option makes outgoing calls
		request reverse charging.
	-xN	X.25 level of service. N=[0-3].
		0 is X.25 ISO 8878
		1 is X.25/ 1980
		2 is X.25/ 1984
		3 is X.25/ 1988
		Specifying this option turns off support for the service specified by N. The
		default is to have all possible levels of service supported. Only those levels
		supported by the subnetwork are valid. See the file ots_subnets for related
		parameters.
	-XN	X.25 level of service. N=[0-3].
		0 is X.25 ISO 8878
		1 is X.25/ 1980
		2 is X.25/ 1984
		3 is X.25/ 1988
		Specifying this option turns on support for the service specified by N. The
		default is to have all possible levels of service supported. Only those levels
		supported by the subnetwork are valid. See the file ots_subnets for related
		parameters.
	-f	Flow control off. Specifying this option disallows flow control parameters
		(packet size/window size) to be negotiated. This is the default.
	-F	Flow control on. Specifying this option allows flow control parameters
		(packet size/window size) to be negotiated.

88 Chapter 3