Interoperability Testing
Reason and Refuse Codes
Code | Meaning | Action | |
|
|
| |
(0xF9) | Protocol Error Detected by Local Transport | Generate a trace and contact | |
| Error encountered decoding a PDU sent by | your HP support | |
| representative. | ||
| the remote Transport entity. | ||
|
| ||
|
|
| |
(0xFA) | Protocol Error Detected by Local Session | Generate a trace and contact | |
| Error encountered decoding a PDU sent by | your HP support | |
| representative. | ||
| the remote Transport entity. | ||
|
| ||
|
|
| |
(0xFC) | Insufficient Resources for Local Transport | Examine other OTS | |
| Stack experiencing resource problems. | processes running. Contact | |
| HP support representative if | ||
|
| ||
|
| condition persists. | |
|
|
| |
(0xFD) | Insufficient Resources for Local Session | Examine other OTS | |
| Stack experiencing resource problems. | processes running. Contact | |
| HP support representative if | ||
|
| ||
|
| condition persists. | |
|
|
| |
(0xFE) | Insufficient Resources for Local | Examine other OTS | |
| ACSE/Presentation | processes running. Are you | |
| Stack experiencing resource problems. | near the 448 connection limit? | |
| Contact HP support | ||
|
| ||
|
| representative if condition | |
|
| persists. | |
|
|
| |
(0xFF) | Local User Error | Check parameters values you | |
| Usually caused by overriding parameter | changed. | |
|
| ||
| default values, Could result from trying to |
| |
| run an operation in the wrong state. |
| |
|
|
| |
Code Unknown | Examine documentation of | ||
X.25 | An unrecognized error code was received. | other vendor for disconnect | |
reason codes. If X.25 range, | |||
| |||
Transport |
| run an X.25 connection test, | |
|
| the diagnostic information | |
|
| may be helpful. | |
|
|
|
50 | Chapter 1 |