HP UX 11i v2 Networking Software instruction

Interoperability Testing

Reason and Refuse Codes

Code	Meaning	Action

(0x08)	N-Reject (NSAP unreachable/ Permanent)	Use osiadmin or otsshowes
	Network connection could not be established	to examine the conﬁgured
	Network connection could not be established	X.121 address for this NSAP.
	because the X.121 address was incorrect.	X.121 address for this NSAP.
	because the X.121 address was incorrect.	Verify if remote is up and
		Verify if remote is up and
		listening on the conﬁgured
		address.

(0x09)	N-Reset from NS Provider (No Reason)	No recognized diagnostic is
	Network connection was reset.	provided.
	Network connection was reset.

(0x0a)	N-Reset from NS Provider (Congestion)	X.25 diagnostic indicates
	Network connection was reset.	provider was a problem.
	Network connection was reset.

(0x0b)	N_Reject (Address Unknown)	Use osiadmin or otsaddes
	No destination or route entry exists for the	to conﬁgure the destination
	No destination or route entry exists for the	system.
	given NSAP. Network connection cannot be	system.
	given NSAP. Network connection cannot be
	established.

(0x12)	Disconnect for NS User Remote Transport
	layer encountered a failure and abruptly
	released the network connection.

(0x14)	User N_Reject (Transient)
	The remote Transport layer refused this
	network connection request.

(0x15)	User N_Reject (Permanent) The remote
	Transport layer refused this network
	connection request.

(0x16)	User N_Reject (QOS unavail/ Transient)
	QOS negotiation failure

(0x17)	User N_Reject (QOS unavail/ Permanent)
	QOS negotiation failure

(0x18)	N_Reject ((Unrecognized NS-user- data)

46

Chapter 1

Image 46

HP UX 11i v2 Networking Software manual 0x08 Reject Nsap unreachable/ Permanent

Contents

HP 9000 Networking 32070-90031 E0597 Legal Notices Copyright Notices Trademark Notices Page Contents Problem Solving Using OSI and OTS Tools Syntax Example Recovering from otsstart Failure Updating OTS otsupdate Printing History Page Interoperability Testing Testing Ftam Interoperability Ftam Interoperability Testing Ftam Pre-Test Checklist Ftam Pre-Test ChecklistCheck the following before attempting to run the Ftam tests Ftam Interoperability Testing Ftam Connectivity Test Ftam File Transfer Test Interpreting Ftam Errors Ftam Call Errors Reason Corrective Action Ftam Call Reason Corrective Action Testing Apri Interoperability Apri Pretest Checklist Apri Pre-Test Checklist Running Apri Tests Client Mode Running Apri Tests Server Mode Interpreting Apri Errors Apri Call Errors Reason Corrective Action Apri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test Checklist Running Session Tests Client Mode Running Session Tests Server Mode Interpreting Session Errors Session Call Errors Reason Corrective Action Session Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test Checklist Running Transport Tests Problem persists Interpreting Transport ErrorsTransport problem corrected Transport Call Errors Reason Action Testing LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test Checklist Running LAN Tests LAN Errors Reason Action Interpreting LAN ErrorsLAN problem corrected Conﬁguration change required Error Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test Checklist Running X.25 Tests Problem corrected Interpreting X.25 ErrorsErrors Reason Action Recv*00B Reason and Refuse Codes Protocol Reason Codes Code Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Session Refuse Codes Session Refuse CodesCode Meaning To Create a Result File Problem Solving Basic Steps Interpreting Errors Interpreting ErrorsWhere Action Checking System Status Status Check Status Check Running Veriﬁcation Tests Link Veriﬁcation Service Veriﬁcation OTS Transport Veriﬁcation Running Veriﬁcation Tests Troubleshooting Methods Collecting Troubleshooting DataType Troubleshooting Method Error Tracing and Logging through Opt/ots/bin/osidiag Tracing and Logging User Applications Service/Layer Entities to LogLogging and Tracing Entities Fddi Otsdests Common Mistakes Common Conﬁguration MistakesOtssubnets Common Mistakes Localapp Common Mistakes Otsparms Common MistakesRemoteapp Common Mistakes Subsystem OTS Common Logged ErrorsError Description Subsystem Acsepres Subsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Conﬁgure Using osiconf Managing Your Conﬁguration Troubleshooting Using osiconfchk Tests Provided by osidiag OSI DiagnosticsComponent Test Fddi Osistart Command Starting and Stopping OSI Osistat Command Stopping OSI Syntax Starting OTS otsstartExample Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate Dynamic Routing Commands End System Commands Intermediate System Commands Otsaddis Argument ES/IS Command ParametersES/IS Parameters Parameter ES/IS Command Options Option Description Route Commands Dynamic Routing Commands Route Command Parameters Dynamic Route Commands Route Command Options Route Command OptionsNsap Commands Argument Description Otsshownsaps Index Apri Index