Reason and Refuse Codes | HP UX 11i v2 Networking Software guide

Interoperability Testing

Reason and Refuse Codes

Reason and Refuse Codes

Protocol Reason Codes

The following are reason codes that may be logged or returned to your program.

Session Provider Abort Reason Code

The value passed back to Session programs by the ses_pabort_id() routine.

Transport Disconnect Reason Code

The value passed back to XTI program by the t_rcvdis() routine.

ASCE/Presentation DCNX_KO Log Message

The value shown in the second low order byte of the Cause ﬁeld (f3 in

Cause = 0x0001f3ff).

Session S_REJECT Log Message

The value shown in the second low order byte of the Cause ﬁeld (f3 in

Cause = 0x0001f3ff).

Transport T_REJECT Log Message

The value shown in the second low order byte of the Cause ﬁeld (f3 in

Cause = 0x0001f3ff).

Network N_REJECT Log Message

The value shown in the second low order byte of the Org/Reas ﬁeld (the “08” in Org/Reas = 0108).

Table 1-7 shows the reason code value, its meaning, and possible corrective actions.

Table 1-7		Reason and Refuse Codes

	Code	Meaning	Action

	(0)	Normal disconnect Speciﬁed address may be	Verify that OSI services are
		correct, but there is no process listening for a	up in the remote. Verify that
		connection.	the T-selector is speciﬁed.

44

Chapter 1

Image 44

HP UX 11i v2 Networking Software manual Reason and Refuse Codes, Protocol Reason Codes

Contents

HP 9000 Networking 32070-90031 E0597 Legal Notices Copyright Notices Trademark Notices Page Contents Problem Solving Using OSI and OTS Tools Syntax Example Recovering from otsstart Failure Updating OTS otsupdate Printing History Page Interoperability Testing Testing Ftam Interoperability Ftam Interoperability Testing Check the following before attempting to run the Ftam tests Ftam Pre-Test ChecklistFtam Pre-Test Checklist Ftam Interoperability Testing Ftam Connectivity Test Ftam File Transfer Test Interpreting Ftam Errors Ftam Call Errors Reason Corrective Action Ftam Call Reason Corrective Action Testing Apri Interoperability Apri Pretest Checklist Apri Pre-Test Checklist Running Apri Tests Client Mode Running Apri Tests Server Mode Interpreting Apri Errors Apri Call Errors Reason Corrective Action Apri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test Checklist Running Session Tests Client Mode Running Session Tests Server Mode Interpreting Session Errors Session Call Errors Reason Corrective Action Session Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test Checklist Running Transport Tests Interpreting Transport Errors Transport problem correctedProblem persists Transport Call Errors Reason Action Testing LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test Checklist Running LAN Tests Interpreting LAN Errors LAN problem correctedLAN Errors Reason Action Conﬁguration change required Error Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test Checklist Running X.25 Tests Errors Reason Action Interpreting X.25 ErrorsProblem corrected Recv*00B Reason and Refuse Codes Protocol Reason Codes Code Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Code Meaning Session Refuse CodesSession Refuse Codes To Create a Result File Problem Solving Basic Steps Where Action Interpreting ErrorsInterpreting Errors Checking System Status Status Check Status Check Running Veriﬁcation Tests Link Veriﬁcation Service Veriﬁcation OTS Transport Veriﬁcation Running Veriﬁcation Tests Type Troubleshooting Method Error Collecting Troubleshooting DataTroubleshooting Methods Tracing and Logging through Opt/ots/bin/osidiag Logging and Tracing Entities Service/Layer Entities to LogTracing and Logging User Applications Fddi Otssubnets Common Mistakes Common Conﬁguration MistakesOtsdests Common Mistakes Remoteapp Common Mistakes Otsparms Common MistakesLocalapp Common Mistakes Common Logged Errors Error DescriptionSubsystem OTS Subsystem Acsepres Subsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Conﬁgure Using osiconf Managing Your Conﬁguration Troubleshooting Using osiconfchk Component Test OSI DiagnosticsTests Provided by osidiag Fddi Osistart Command Starting and Stopping OSI Osistat Command Stopping OSI Example Starting OTS otsstartSyntax Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate Dynamic Routing Commands End System Commands Intermediate System Commands Otsaddis ES/IS Command Parameters ES/IS ParametersArgument Parameter ES/IS Command Options Option Description Route Commands Dynamic Routing Commands Route Command Parameters Dynamic Route Commands Route Command Options Nsap CommandsRoute Command Options Argument Description Otsshownsaps Index Apri Index