Interoperability Testing
Reason and Refuse Codes
Code | Meaning | Action |
|
|
|
(0x82) | Connection Negotiation Failed | Check to see if remote only |
| May be a problem with the classes specified | uses class 0. If so you might |
| reconfigure the local stack to | |
| (transport over CONS error). | |
| force class 0. | |
|
| |
|
|
|
(0x83) | Duplicate Source Reference for Same NSAP | The caller must generate a |
| This is a protocol error. | unique reference number for |
| each connection it forms. | |
|
| |
|
|
|
(0x84) | Mismatched References | Check the state of the remote |
| Either a protocol error, or may indicate that | stack. |
|
| |
| the remote stack was taken down and |
|
| brought back up while existing connections |
|
| remained. |
|
|
|
|
(0x85) | Protocol Error | Check any logged |
|
| information on the remote |
|
| side. Also verify the stack was |
|
| not being brought up at the |
|
| time. |
|
|
|
(0x88) | Connection Request Refused on this Network | On HP systems, examine the |
| Connection | Transport over CONS |
| The level of multiplexing configured for the | parameters |
| tpcons_max_con_mux_in | |
| local node may not be compatible with that | |
| and | |
| on the remote. | |
| tpcons_max_con_mux_out | |
|
| |
|
| and change if max out exceeds |
|
| max in. |
|
|
|
(0x8A) | Header or Parameter Length Invalid | Check log information on |
| Indicates a protocol error. | remote. |
|
| |
|
|
|
(0xE4) | X.25 Network Error or Network Down | Run x25stat to determine |
|
| the status of the X.25 link. |
|
| May need to restart X.25 or |
|
| reset other X.25 hardware. |
|
|
|
48 | Chapter 1 |
